3
PIO-16/16L(PCI)H, PI-32L(PCI)H, PO-32L(PCI)H
Ver.1.00
Product Configuration List
- Board(One of the following)
[PIO-16/16L(PCI)H, PI-32L(PCI)H, or PO-32L(PCI)H]
- First step guide ... 1
- CD-ROM *1 [API-PAC(W32)] ... 1
*1 The CD-ROM contains the driver software and User's Guide
(this guide)
Support Software
You should use CONTEC support software according to your
purpose and development environment.
API-PAC(W32) is the library software that provides the commands
for CONTEC hardware products in the form of Windows standard
Win32 API functions (DLL). It makes it easy to create high-speed
application software taking advantage of the CONTEC hardware
using various programming languages that support Win32 API
functions, such as Visual Basic and Visual C/C++.
It can also be used by the installed diagnosis program to check
hardware operations.
CONTEC provides download services to supply the updated drivers
and differential files.
For details, read Help on the bundled CD-ROM or visit the
CONTEC's Web site.
< Operating environment >
OS
Windows XP, 2000, NT, Me, 98, etc..
Adaptation language
Visual C/C++, Visual Basic, Delphi, Builder,
etc..
Others
Each piece of library software requires
50 megabytes of free hard disk space.
This driver is used to control CONTEC digital I/O boards (cards)
from within Linux.
You can control CONTEC I/O boards easily using the shared library
used by gcc and Kylix, the device driver (module) for each kernel
version, and the board (card) configuration program (config).
CONTEC provides download services to supply the updated drivers
and differential files.
For details, read Help on the bundled CD-ROM or visit the
CONTEC's Web site.
< Operating environment >
OS
RedHatLinux, TurboLinux, etc..
(For details on supported distributions,
refer to Help available after installation.)
Adaptation language
gcc, Kylix, etc..
Others
Requires 3 megabytes of free hard disk space.
This is a VI library to use in National Instruments LabVIEW.
VI-DAQ is created with a function form similar to that of LabVIEW's
Data Acquisition VI, allowing you to use various devices without
complicated settings.
See http://www.contec.com/vidaq/ for details and download of VI-
DAQ.
Cable & Connector
Flat Cable with a 37-Pin D-type Connectors on 2Ends
: PCB37P-1.5 (1.5m)
: PCB37P-3 (3m)
: PCB37P-5 (5m)
Shielded cable with two 37-pin D- Type connectors
: PCB37PS-0.5P (0.5m)
: PCB37PS-1.5P (1.5m)
: PCB37PS-3P (3m)
: PCB37PS-0.5P (0.5m)
Flat Cable with a 37-pin D-type Connector
: PCA37P-1.5 (1.5m)
: PCA37P-3 (3m)
: PCA37P-5 (5m)
Shielded Cable with Two 37-pin D-Type Connectors
: PCA37PS-0.5P (0.5m)
: PCA37PS-1.5P (1.5m)
: PCA37PS-3P (3m)
: PCA37PS-5P (5m)
D-SUB37P Male Connector Set (5 Pieces)
: CN5-D37M
Accessories
Screw Terminal
: EPD-37A *1
Screw Terminal
: EPD-37 *1
Termination Panel (M3)
: DTP-3(PC)
Termination Panel
: DTP-4(PC)
Signal Monitor for Digital I/O
: CM-32(PC)E *1
*1
A PCB37PS or PCB37PS optional cable is required separately.
* Check the CONTEC's Web site for more information on these
options.