PC-SDD32V3-SC, PC-SDD64V3-SC, PC-SDD320V3-SC
CONTEC CO., LTD.
- 2 -
Hardware Specifications
Hardware Specifications
Model
PC-SDD32V3-SC
PC-SDD64V3-SC
PC-SDD320V3-SC
Format capacity
32MB
64MB
320MB
Bus specification
SCSI-2
Terminator *1
OFF (The setting cannot be changed.)
Setting the ID address
It is possible to set it with the JPSW on the substrate. * factory setting ID 0
Transfer rate
Bus transfer rate
Synchronization : 5Mbyte/sec (Max.), Asynchronization : 5Mbyte/sec (Max.)
Memory transfer rate
(Reading)
5.0Mbyte/sec
(Writing)
0.7Mbyte/sec
1.5Mbyte/sec
3.0Mbyte/sec
Access rate (Reading) *2
2.0Mbyte/sec
(Writing) *2
0.6Mbyte/sec
1.1Mbyte/sec
1.6Mbyte/sec
Data reliability
Frequency of unrecoverable errors per bit : Less than 1 / 1014 reads
ECC
64bits / Sector
Min. limit on number
of overwrites
300,000 times per physical overwrites
Rated voltage
5VDC ± 5%
Power consumption
360mA (Max.)
Operating conditions
Temperature
0 to 60°C
Humidity
-20 to 80°C
Storage temperature
8 to 95%RH (not condensing)
Anti-vibration
15G (Max.) (during operation)
Anti-shock
1000G (Max.) (during operation)
External dimensions (mm)
101.6(W) x 146.5(D) x 24.4(H)
Connector
SCSI 50pin
Weight
260g
*1 Do not use this product in the end of built-in SCSI an equipment.
Use the terminator separately when using it in the single.
*2 An access rate is reference value. Value may not correspond by the use condition.
PC
(mother board)
SBC
This product
SCSI cable (50pin)
PC
(mother board)
(SBC)
This product
SCSI cable (50pin)
<Connection example when two
or more SCSI equipment is used.>
<Connection example
when single using it.>
Active
terminator
...
Other SCSI
equipment
or
Active
terminator
...
...
...