Contec GP-IB(CB)F Скачать руководство пользователя страница 13

Страница: 13 / 61

1. Before Using the Product

GP-IB(CB)F,

GP-IB(CB)FL

Handling Precautions

DANGER

Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in an

explosion, fire, electric shock, or failure.

CAUTION

Mount the PC card in a PC Card Standard CardBus compatible PC card slot.

Do not strike or bend the PC Card. Doing so could damage the PC Card.

Otherwise, the PC Card may malfunction, overheat, cause a failure or breakage.

Do not subject the socket used to connect the cable to the PC card to knocks or other excessive force.

Otherwise, the PC card may malfunction, overheat, or cause a failure.

Do not insert or remove the PC card in the card slot when the power is turned on to the PC.

Do not insert or remove the cable while the power is turned on to the PC.

Connect the cable to the card before inserting the card into the PC.

Otherwise, the PC card may malfunction, overheat, or cause a failure.

Do not try to remove the cable from the connecter on the PC card without pressing the locking spring

as this may prevent the cable from being securely connected.

When you use the PC Card in a noisy environment or are nervous about noise, strengthen the

earthing between the PC Card frame and the frame ground of your PC. Specifically, install the PC

Card attachment, and then connect the PC Card frame and the frame ground of the PC to earth the

PC Card frame (e.g. using an earth cable).

Ensure that the PC power supply has sufficient capacity for all mounted cards.

An inadequate power supply may cause misoperation, overheating, or faults.

The specifications of this product are subject to change without notice for enhancement and quality

improvement.

Even when using the product continuously, be sure to read the manual and understand the contents.

Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting

from modifying this product.

Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

Содержание GP-IB(CB)F






























































Результаты поиска

Содержание GP-IB(CB)F

Отзывы:

Похожие инструкции для GP-IB(CB)F

Бренды по названию

Популярные бренды

Contec GP-IB(CB)F, Руководство пользователя

Результаты поиска

Содержание GP-IB(CB)F

Отзывы:

Похожие инструкции для GP-IB(CB)F

Бренды по названию

Популярные бренды