Contec GMB-L3WHL200, Справочное руководство

Страница: 50 / 86

—
BIOS Setup
—
GMB-L3WHL200 Reference Manual
- 50 -
2. Using Setup
In general, you use the arrow keys to highlight items, press <Enter> to select, use the PageUp and
PageDown keys to change entries, press <F1> for help and press <Esc> to quit. The following table
provides more detail about how to navigate in the Setup program using the keyboard.
Key Function
↑
Move to previous item
↓
Move to next item
←
Move to the item in the left hand
→
Move to the item in the right hand
Esc key
Main Menu -- Quit and not save changes into NVRAM
Status Page, Setup Menu, and Option Page Setup Menu -- Exit current page and return
to Main Menu
+ key
Increase the numeric value or make changes
- key Decrease the numeric value or make changes
F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu
F2 key Previous Values.
F3 key Optimized defaults
F4 key
Save & Exit Setup
3. Getting Help
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press <Esc> key or the F1 key again.
4. In Case of Problems
If, after making and saving system changes with Setup, you discover that your computer no longer
can boot, the AMI BIOS supports an override to the NVRAM settings which resets your system to its
defaults.
The best advice is to only alter settings which you thoroughly understand. To this end, we strongly
recommend that you avoid making any changes to the chipset defaults. These defaults have been
carefully chosen by both BIOS Vendor and your systems manufacturer to provide the absolute
maximum performance and reliability. Even a seemingly small change to the chipset setup has the
potential for causing you to use the override.
5. A Final Note About Setup
The information in this section is subject to change without notice.