background image

 

Chapter 4: Notes 

When FX-DS540-MPCI4W is installed in the wireless LAN access point, the following remarks are 
to be considered: 

1.

 

FX-DS540-MPCI4W is designated its own FCC ID Number: PQRDS540-MPCI4W; therefore, 
the FCC ID Number should be appeared on the label on the exterior of the wireless LAN access 
point unless it is visible from outside.    Such label on the exterior should include a statement, 
either “Contains Wireless LAN Module FCC ID: PQRDS540-MPCI4W” or “Contains FCC 
ID: PQRDS540-MPCI4W”. 

2.

 

FX-DS540-MPCI4W is in compliance with the requirements of sub-sections 15.203, 15.205,   
15.207, 15.209, 15.247 and 15.407 of FCC Rules Part 15.    FX-DS540-MPCI4W is to be 
installed in accordance with their requirements.     

3.

 

User Manual of the wireless LAN access point, in which is FX-DS540-MPCI4W installed, will 
include the following statements required by FCC.     

-    FCC WARNING: Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the equipment 

-        This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.   

-

 

In according with 47 CFR Part15.407 (e) U-NII devices operating in 5.15-5.25GHz 
frequency bands are restricted to indoor operations only. 

-

 

This transmitter must not be co-located or operated in conjunction with any other 
antenna or transmitter. 

-

 

This equipment complies with FCC radiation exposure limits set forth for 
uncontrolled equipment and meets the FCC radio frequency (RF) Exposure 
Guidelines in Supplement C to OET65.    This equipment should be installed and 
operated with at least 20cm and more between the radiator and person’s body 
(excluding extremities: hands, wrists, feet and legs).     

4.      The installers must ensure that the public is not exposed to radio frequency energy levels in 

excess of FCC guidelines in accordance with FCC Rules: Part 15 and FCC OET Bulletin 65, 
Supplement C.   

 

 

Содержание FX-DS540-MPCI4W






Отзывы: