Contec FX-DS110-APL Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 69

Contec FX-DS110-APL Скачать руководство пользователя страница 37

Settings

FX-DS110-APL

29

Enable DIP Switch

If this box is checked, the DIP switch settings on this unit (mode
and unit type) are enabled.

Factory setting: Checked (DIP switches enabled)

･

Network Mode

Determines the operating mode of this unit. This setting is not
available if 'Enable DIP Switch' is checked.

Factory setting: Setting not available (DIP switch setting enabled).

･

Unit Type

This setting determines whether the unit operates as an access point
or station.    In access point (AP) mode, this unit controls other user
units or access points operating in station mode.    In station mode,
this unit is controlled by (logged in to) another AP.

Factory setting: Setting not available (DIP switch setting enabled).

Data Scramble

This setting determines whether wireless data is scrambled. Note
that it is not possible to communicate between a terminal with data
scramble enabled and a terminal with data scramble disabled, or
between two terminals with data scramble enabled but using
different scramble keys.

Factory setting: Not checked (data scramble off).

･

Scramble Key

Used for scrambling of wireless data.

Factory setting: [00.00.00.00.00.00.00.00.00.00]

Input values:

Hexadecimal values (0-9, A-F).

«
...
35
36
37
38
39
...
»

Содержание FX-DS110-APL






































































Отзывы:

Нет отзывов