Contec Flexlan PC Card FX-DS-110 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 52

background image

Introduction

FX-DS110-PCC

5

Notes on Radio Interference

The frequency band used by this product covers the operating
frequencies of mobile-identification local radio stations (requiring
the license) and specific low-power radio stations (requiring no
license) as well as industrial, scientific, and medical equipment
such as microwave ovens.

1.

Before using this product, make sure that there is no mobile-
identification local radio station or specific low-power radio
station operating near the product.

2.

If the product should cause radio interference with any mobile-
identification local radio station or specific low-power radio
station, immediately change the operating frequency to avoid
the radio interference.

3.

Contact your local retailer or CONTEC if the product has
trouble such as recurrent radio interference with mobile-
identification local radio stations or specific low-power radio
stations.

This product operates in the 2.4 GHz band

and uses DSSS for modulation. The
interfering distance is 40 mm.

Precautions Related to Electromagnetic Interference

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions : (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

This equipment complies with part 15 of the FCC rules. Any changes or
modifications not expressly approved by the manufacturer could void
the user’s authority to operate the equipment.

CAUTION: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 5 cm must be
maintained between this device and all persons.

2.4

DS

4

«
...
10
11
12
13
14
...
»

Содержание Flexlan PC Card FX-DS-110





















































Отзывы:

Нет отзывов

Похожие инструкции для Flexlan PC Card FX-DS-110

Бренд: VAF instruments Страницы: 56

iW-RainboW-G30D

Бренд: iWave Страницы: 89

Бренд: Altera Страницы: 42

OP-8000-EDFA-1U Series

Бренд: Optostar Страницы: 9

Бренд: Z-Wave Страницы: 6

iMarc SLV 9820-2M

Бренд: Paradyne Страницы: 24

Бренд: Aaeon Страницы: 100

Бренд: IEI Technology Страницы: 106

Бренд: ADTRAN Страницы: 4

mvHYPERION-32R16

Бренд: Matrix Vision Страницы: 148

Бренд: OWC Страницы: 7

Бренд: Aaeon Страницы: 22

Бренд: AA WIRELESS Страницы: 55

Бренд: IC Realtime Страницы: 8

Instruction Card Video DC Block

Бренд: Extron electronics Страницы: 1

Бренд: Lenze Страницы: 15

Бренд: Zte Страницы: 29

Бренд: East Coast Datacom Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды