3. Hardware Setup
DS-280H Series User’s Manual
7
3.
Hardware Setup
-
Before you start, be sure that the power is turned off.
Before Using the Product for the First Time
Follow the next steps to set up this product:
STEP1
By referring to the information in this chapter, install, connect and set this product.
STEP2 Connect
cables.
Connect the cable of necessary external devices, such as keyboard and a display, to this
product using appropriate cables.
STEP3
Turn on the power.
Check if STEP1-2 were correctly done, again.
Check that AC plug is not connected, then insert DC jack of AC adapter into the product.
Insert AC plug into AC inlet. The product will wake up.
If you feel any abnormality after connection, pull out AC plug quickly,
and then check if all installation was correctly done.
*.This product supports an attached AC adapter and AC cable ONLY.
STEP4
Set up BIOS.
By referring to Chapter 5, set up BIOS. This setup requires a keyboard and a display.
* Before using this product, be sure to execute "LOAD SETUP DEFAULTS" to initialize
the BIOS settings to their default values.
(See Chapter 5, "Main Menu.")
CAUTION
Be sure to connect the keyboard and mouse to it before turning the power on for the first time.
