Contec DIO-96D2-LPCI, Руководство пользователя, Страница: 10 / 65

1. Before Using the Product
DIO-96D2-LPCI
3
Cable & Connector (Option)
Cable with 68-Pin D-sub Connector at either Ends (Mold Type)
: PCB68PS-0.5P (0.5m)
: PCB68PS-1.5P (1.5m)
Shield Cable with One 68-Pin Connector
: PCA68PS-0.5P (0.5m)
: PCA68PS-1.5P (1.5m)
Shielded Cable for CardBusDigital I/O Card
: DIO-68M/96F (0.5m)
* If using both the CNA and CNB connectors, two cable sets are required.
Accessories (Option)
Screw Terminal Unit (M3 x 68P) : EPD-68A *1*3
Screw Terminal Unit (M3 x 96P) : EPD-96A *2*3
Screw Terminal Unit (M3.5 x 96P) : EPD-96 *2
Terminal Unit for Cables (M3 x 96P) : DTP-64A *2
*1 PCB68PS-0.5P or PCB68PS-1.5P optional cable is required separately.
*2 DIO-68M/96F optional cable is required separately.
*3 “Spring-up” type terminal is used to prevent terminal screws from falling off.
*4 If using both the CNA and CNB connectors, two each of the accessories and cable sets are required.
* Check the CONTEC’s Web site for more information on these options.