Contec DIO-96D-LPE Скачать руководство пользователя страница 8

Страница: 8 / 67

1. Before Using the Product

DIO-96D-LPE

Before Using the Product

This chapter provides information you should know before using the product.

About the Board

This product is a PCI Express bus-compliant interface board that extends the input/output function of

bi-directional digital signal. This board has up to 96 unisolated LVTTL-level input/output channels that

is powered by the equivalence to the mode 0 of i8255 chips, and you can use up to 96 channels of the

input signals as interrupt inputs. You can select the input/output by the application software in eight

signals units (in four signals unit for some inputs/outputs). Additionally, the digital filter function is

equipped with this product. Windows/Linux driver is bundled with this product.

Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.

Features

This board can be used to input/output 96 points bi-directional digital corresponding to to the

equivalence to the i8255 mode 0.

This board has up to 96 unisolated LVTTL-level input/output channels whose response speed is

200

sec that is powered by to the equivalence to the mode 0 of i8255 device for general-purpose.

You can select the input/output by the application software in eight signals units (in four signals unit

for some inputs/outputs).

You can use up to 96channels of the input signals as interrupt events.

You can use up to 96channels of the input signals as interrupt events and also disable or enable the

interrupt in bit units and select the edge of signals, at which to generate an interrupt.

This product has a digital filter function to prevent wrong recognition of input signals from carrying

noise or a chattering.

This product has a digital filter function to prevent wrong recognition of input signals by noise or

chattering is provided. All input terminals can be added a digital filter, and the setting can be

performed by software.

Windows/Linux compatible driver libraries are attached.

Using the attached driver library API-PAC(W32) makes it possible to create applications of

Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be

checked is provided.

Support for both of Low Profile and standard size slots

Support for both of Low Profile and standard size slots (interchangeable with a bundled bracket).

Functions and connectors are compatible with PCI compatible board DIO-96D2-LPCI.

The functions same with PCI compatible board DIO-96D2-LPCI are provided. In addition, as there

is compatibility in terms of connector shape and pin assignments, it is easy to migrate from the

existing system.

LabVIEW is supported by a plug-in of dedicated library VI-DAQ.

Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.

Содержание DIO-96D-LPE




































































Результаты поиска

Содержание DIO-96D-LPE

Отзывы:

Contec DIO-96D-LPE, Руководство пользователя, Страница: 8 / 67

Результаты поиска

Содержание DIO-96D-LPE

Отзывы: