Contec DI-64T-PE, Руководство пользователя

Страница: 11 / 73

1. Before Using the Product
4
DIO-3232T-PE, DI-64T-PE, DO-64T-PE
Cable & Connector (Option)
Shield Cable with 96-Pin Half-Pitch Connectors at Both Ends
: PCB96PS-0.5P (0.5m)
: PCB96PS-1.5P (1.5m)
Flat Cable with 96-Pin Half-Pitch Connectors at Both Ends
: PCB96P-1.5 (1.5m)
Shield Cable with 96-Pin Half-Pitch Connectors at One End
: PCA96PS-0.5P (0.5m)
: PCA96PS-1.5P (1.5m)
Flat Cable with 96-Pin Half-Pitch Connectors at One End
: PCA96P-1.5 (1.5m)
Distribution shield cable with 96-Pin Half-Pitch Connectors (96P
→
37P x 2)
: PCB96WS-1.5P (1.5m)
Half Pitch 96P Female Connector Set (5 Pieces) : CN5-H96F
Accessories (Option)
Screw Terminal Unit (M3 x 96P) : EPD-96A *1*2
Screw Terminal Unit (M3.5 x 96P) : EPD-96 *1
Terminal Unit for Cables (M2.5 x 96P) : DTP-64(PC) *1
Signal Monitor / Output Accessory for Digital I/O (64P) : CM-64(PC)E *1
Screw Terminal Unit (M3 x 37P) : EPD-37A *2*3
Screw Terminal Unit (M3.5 x 37P) : EPD-37 *3
General Purpose Terminal (M3 x 37P) : DTP-3A *3
Screw Terminal (M2.6 x 37P) : DTP-4A *3
Signal Monitor / Output Accessory for Digital I/O (32P) : CM-32(PC)E *3
Connection Conversion Board (96-Pin
→
37-Pin x 2) : CCB-96 *4
*1 A PCB96P or PCB96PS optional cable is required separately.
*2 “Spring-up” type terminal is used to prevent terminal screws from falling off.
*3 A PCB96WS optional cable is required separately.
*4 Option cable PCB96P or PCB96PS, and the cable for 37-pin D-SUB are required separately.
* Check the CONTEC’s Web site for more information on these options.