Contec DI-64L-PE, Руководство пользователя, Страница: 60 / 67

6. About Hardware
DIO-3232L-PE, DI-64L-PE, DO-64L-PE
53
DI-64L-PE
Table 6.2. Specification
Item Specification
Input
Input format Opto-coupler isolated input
(Compatible with current sink output) (Negative logic *1)
Number of input signal
channels 64ch (32ch available for interrupts) (1 common in 16ch)
Input resistance 4.7k Ω
Input ON current 2.0mA or more
Input OFF current 0.16mA or less
Interrupt 32 interrupt input signals are arranged into a single output of interrupt signal
INTA.
An interrupt is generated at the rising edge (HIGH-to-LOW transition) or
falling edge (LOW-to-HIGH transition).
Response time Within 200 µ sec
Common
I/O address Any 32-byte boundary
Interruption level 1 level use
Max. board count for
connection 16 boards including the master board
Isolated Power 5000Vrms
External circuit power
supply 12 - 24VDC(±10%)
Power consumption
3.3VDC 350mA (Max.)
Operating condition 0 - 50°C, 10 - 90%RH (No condensation)
Allowable distance of
signal extension
Approx. 50m (depending on wiring environment)
Bus specification PCI Express Base Specification Rev. 1.0a x1
Dimension (mm) 169.33(L) x 110.18(H)
Connector
96 pin half pitch connector [M (male) type]
PCR-[HONDA TSUSHIN KOGYO CO., LTD.] equivalent to it
Weight
215g
Standard
VCCI Class A, CE Marking (EMC Directive Class A, RoHS Directive)
*1 Data “0” and “1” correspond to the High and Low levels, respectively.