Contec COM-1PDH-LPE, Руководство пользователя, Страница: 26 / 45

2. Setup
COM-1PDH-LPE
21
Updating the Settings
(1) If you wish to change a port number, open the properties page for the port and click the
[Advanced…] button under [Port Settings].
(2) Use the [COM Port Number] combo box to modify the COM port number.
(3) Clicking the [Advanced...] button opens the “Advanced Settings for COMn” window.
- Use the “COM Port Number” combo box to select the COM port number.
- By selecting the “Compulsion Half-Duplex”, the software settings are forced to switch from full-
duplex communication to half-duplex.
- By selecting the “Used Serial Mice”, support for the serial mouse devices is enabled.
You have now finished installing the initial setting of Software.
For Windows 2000 and later operating systems, COM ports that are determined by the operating
system to not be in use are assigned. The COM ports are not assigned by the CONTEC device
driver. Therefore, they may not be assigned starting from CH1 depending on your environment. In
this situation, follow the procedure shown below to determine the CH number, and then use the
procedure under [Updating the Settings] above to reassign the COM port numbers.
1. Double-click the CONTEC product registered under [Multifunction adapters], click the
[Resources] tab, and then check the assigned [I/O Range].
CAUTION