2. Setup
24
COM-1(LPCI)H,
COM-2(LPCI)H, COM-4(LPCI)H
For use under Windows NT, Me, 98 or 95
Installing the setup information (INF) file.
This procedure only applies to Windows NT.
(1) Right click on the \PCI\ComDrv\COMNT_PI.INF file in the CD-ROM, then left click on the
[Install] button.
Invoking API-TOOL Configuration
(1) Execute C:\CONTEC\Config.exe.
(2) Check that [COM-DRV Setting] appears on the screen.
If a different driver name appears, execute [Tools] - [COM-DRV].
(3) Windows NT, execute [Edit] - [Add Board] to register the board type, COM port number and related
settings. Alternatively, double click on a board type name that is already displayed on the screen
and modify the COM port number and related settings.
On other than Windows NT, double click on the board type name that is already displayed on the
screen and modify the COM port number and related settings.
Updating the Settings
(1) Select “Save settings to registry…” from the “File” menu.
(2) After rebooting, the registered COM ports are now able to be used as standard COM ports.
You have now finished installing the initial setting of Software.
* The name of the board
you have just added is
displayed.
- COM-1(LPCI)H
- COM-2(LPCI)H
- COM-4(LPCI)H
