background image

Medical Test Supply

Instructions for CMS-60C Pulse Oximeter

Dear users, thank you very much for purchasing the Pulse Oximeter.  

This Manual is written and compiled in accordance with the council directive MDD93/42/EEC for 
medical devices  and harmonized standards. In case of modifications and software upgrades, the 
information contained in this document is subject to change without notice.

The Manual describes, in accordance with the Pulse Oximeter’s features and requirements, main 
structure, functions, specifications, correct methods for transportation, installation, usage, operation, 
repair, maintenance and storage, etc. as well as the safety procedures to protect both the user and 
equipment. Refer to the respective chapters for details.

Please read the User Manual carefully before using this product. The User Manual which describes 
the operating procedures should be followed strictly. Failure to follow the User Manual may cause 
measuring abnormality, equipment damage and human injury. The manufacturer is NOT responsible 
for the safety, reliability and performance issues and any monitoring abnormality, human injury and 
equipment   damage   due   to   users'   negligence   of   the   operation   instructions.   The   manufacturer’s 
warranty service does not cover such faults.    

Owing to the forthcoming renovation, the specific products you received may not be totally in accor
dance with the description of this User Manual. We would sincerely regret for that. 

This product is medical device, which can be used repeatedly. 

WARNING:

Uncomfortable or painful feeling may appear if using the device ceaselessly, especially for 
the microcirculation barrier patients. It is recommended that the sensor should not be 
applied to the same finger for over 2 hours.

For the special patients, there should be a more prudent inspecting in the placing process. 
The device cannot be clipped on the edema and tender tissue.

The light (the infrared is invisible) emitted from the device is harmful to the eyes, so the 
user and the maintenance man should not stare at the light.

Testee cannot use enamel or other makeup.

Testee’s fingernail cannot be too long.

Please refer to the correlative literature about the clinical restrictions and caution.

This device is not intended for treatment.

The User Manual is published by our company. All rights reserved.

CMS-60C

Содержание CMS60C



















Отзывы: