manualshive.com logo in svg

Contec AI-1216B-RB1-PCI, Руководство пользователя

Поделиться
Скачать
Contec AI-1216B-RB1-PCI Скачать руководство пользователя страница 6

1. Before Using the Product

 

                                                                                                                                                 

AI-1216B-RB1-PCI, AI-1216B-RU1-PCI

1

1.

 

Before Using the Product

About the Product

This product is a non-isolated, PCI-bus-compatible analog input board with a limited input range of

bipolar ±10V(AI-1216B-RB1-PCI) or unipolar 0-10V (AI-1216B-RU1-PCI). With a sole focus on the

basic analog input function, the product offers high cost-effectiveness.

AI-1216B-RB1-PCI has an input range of bipolar ±10V, 12-bit resolution, 16 channels of single-end

input as well as analog input at a conversion speed of 20µsec/ch. In addition, it comes with digital

input/output (non-isolated TTL level: 8 each).

AI-1216B-RU1-PCI has an input range of unipolar 0-10V, 12-bit resolution, 16 channels of single-end

input as well as analog input at a conversion speed of 20µsec/ch. In addition, it comes with digital

input/output (non-isolated TTL level: 8 each).

Using the bundled API function library package [API-PAC(W32)], you can create Windows application

software for this board in your favorite programming language supporting Win32 API functions, such as

Visual Basic or Visual C++.

Features

-

 

Equipped with analog inputs in a range of ±10V or 0-10V, 12-bit single-end input x 16ch,

conversion speed: 20µsec/ch

AI-1216B-RB1-PCI is a non-isolated analog input board equipped with functions such as bipolar

±10V, 12-bit resolution, single-end input x 16ch and a conversion speed of 20µsec/ch.

AI-1216B-RU1-PCI is a non-isolated analog input board equipped with functions such as unipolar

0-10V, 12-bit resolution, single-end input x 16ch and a conversion speed of 20µsec/ch.

-

 

Unisolated TTL level digital input / output 8ch for each

-

 

Windows compatible driver libraries are attached.

Using the attached driver library API-PAC(W32) makes it possible to create applications of Windows.

In addition, a diagnostic program by which the operations of hardware can be checked is provided.

-

 

A/D conversion enabled for a specified channel or multiple channels by software command

Setting a channel by software enables analog input for the specified channel or multiple channels

(consecutive channels starting from channel 0). A/D conversion is performed for each software

command.

Содержание AI-1216B-RB1-PCI

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды