Ver.3.00
AD12-64(PCI)
2
Specification
Item
AD12-64(PCI)
Analog input
Number of input
channels
64 single -ended input channels or 32 differential input channels
(specified by software)
Input range
Non-insulated bipolar ±10V, ±5V, ±2.5V, ±1.25V
or Non-insulated unipo lar 0~10V, 0~5V, 0~2.5V, 0~1.25V
(specifiable by software for each channel)
Maximum input voltage
±15V
Input impedance 1 M Ohm or higher
Resolution
12bit
Non-1inear error *1
±2LSB (±10V, ±5V, 0~10V. 0~5V range)
±4LSB (±2.5V, ±1.25V, 0~2.5V range)
±8LSB (0~1.25V range)
Conversion rate
10µsec/ch at Max.
Conversion start trigger
Software/sampling clock
Sampling clock
Internal sampling clock : 10,000~1,073,741,824,000nsec
(specified in steps of 250nsec)
External sampling clock : TTL-level falling edge
Digital input/output
Number of output points Non-insulated 4 output points (TTL-level active high)
Number of input points
Non-insulated 4 input points (TTL-level active high)
Programmable timer
Specifiable cycles
500~1,073,741,824,000nsec (specifiable in steps of 250nsec)
Status
Count -up, count -up overrun
Timer output signal
TTL -level 250nesc low pulse, low output current I
O L
= 24mA
External trigger input
External trigger input signal Non-insulated one point input (TTL-level rising edge)
Status
Trigger input, trigger input overrun
Interrupt
Interrupt level
1point
Interrupt source
8types
Interface connector
CN1
PCR-E96LMD (product of HONDA TUSUSHIN KOGYO Co.,
LTD.) or equivalent
General
I/O addresses
32ports occupied
Operating c onditions
0~50°C, 20~90% (No condensation)
Current consumption *2
DC+5V 700mA (Max.)
Dimensions (mm)
176.4(L) x 107.0(H)
Weight
150g
*1
The nonlinearity error can be 0.1% of the maximum range at an ambient temperature of 0 or
50°C Celsius. The error can be minimized by calibrating the board at the temperature equalto
the temperature of the operating environment.
*2
2 Current consumption increases if power (+5V) is supplied to an external device from
connector.
176.4
1
0
7
.0
[mm]
Board size