Contax U4R Скачать руководство пользователя страница 189

Страница: 189 / 198

Introduction

Getting Ready

Taking Pictures

Playback

Set Up

EN-189

NEXT

BACK

Contents

Glossary

Index

Nomenclature

Menus and Settings

Troubleshooting

The picture
came out
completely
white.

The image is overexposed.

Set the exposure compensation
to a negative value, or execute
mode reset.

67
184

There is a lot of
'noise' in the
image.

Noise is more likely to occur
if high ISO settings are used.

Use the flash or reduce the ISO
sensitivity before shooting.

I can't rotate
images, protect
images, specify
DPOF settings
or format the
memory card.

The SD memory card is
write-protected.

Remove the write-protection for
the card.

When I connect
the camera to
my computer, no
[Removable
disk], [untitled]
or [NO_NAME]
icon appears.

The USB cable is not
connected properly.

Make sure that the USB cable is
securely connected.

139
147

The USB cable is connected
to the keyboard or to the
USB port on a USB hub.

Plug the USB cable into the USB
port on the PC.

The drivers are not installed,
or installation failed.

Follow the procedure described
in Deleting the Device (Windows
98 and Windows 98SE only).

144

I cannot connect
to the printer.

The printer does not support
PictBridge.

Refer to the instructions
provided with the printer.

The printer is not connected
correctly.

Check that the camera is
correctly connected to the
printer with the USB cable.

128

Movies cannot be printed.

You cannot use DPOF
printing if the printer does not
support DPOF printing.

Refer to the instructions
provided with the printer.

Problem

Cause

Solution

Page

Содержание U4R







































































































































































































Результаты поиска

Содержание U4R

Отзывы:

Contax U4R, Руководство пользователя, Страница: 189 / 198

Результаты поиска

Содержание U4R

Отзывы: