Contacta STS K020, Руководство по установке

Страница: 5 / 12

Step 4:
Drill the appropriate size hole near the speaker to
feed wires through the wall to the Staff side of
the booth.
Then, feed the wires through this hole.
Step 5:
Separate the front and rear microphone plates
keeping one of the gaskets on the front
microphone assembly.
Feed the microphone cable through the window.
Thread two of the long 8-32 studs into two
opposite holes as this will help with alignment.
Use painter’s tape to temporarily secure the front
face plate to the window.
Now slip on silicone gasket for the staff side of the
window