Contacta has a policy of continuous product development, therefore small specification changes may not be reflected in these specifications
Images, labels, packaging, accessories and product colours are subject to change without notice
Setting up
Place portable InfoLoop™ Unit on the
desk or counter top between the
hearing aid wearer and the member
of staff so that:
The front of unit, with ‘T’ position label,
faces the hearing aid wearer
The rear of the unit, with the in-built
microphone, faces the staff member
To Charge
Plug in power supply unit
Connect flexible lead socket marked ‘POWER’ on the rear
of the portable InfoLoop™ unit
The unit will slow charge whilst operating (switch “on”)
The unit will fast charge if the slide switch is set to “off”
When charging, the LED will flash red rapidly
When the LED shows steady red, the unit is fully charged
Note:
The unit will operate approximately 4 hours on fully charged batteries
To switch the unit “ON”:
Move the rear slide switch to the “ON”
position
If LED flashes red every few seconds:
The battery is low and requires
charging
Portable InfoLoop
™
IL-PL20-2
contacta
