Contacta IL-EL42-PB, Руководство по установке

Страница: 5 / 12

5
POWER -
Constantly lit red to indicate the device is powered on.
ACTIVE -
Illuminates green when a loop is being driven correctly.
OVERDRIVE -
Becomes increasingly steady red as an audio signal in-
creases. If it is continuously red, the drive level of the loop is too high
and audio may be distorted.
If the ACTIVE LED is not illuminated and the OVERDRIVE LED is con-
stantly illuminated, the induction loop is disconnected or open-circuit.
Remedial action must be taken.
Audio Input Signal
• Standard recommended input:
Computer sound card signal with typical 1 volt RMS.
• Typical levels for larger speakers can be accepted by removing the
two jumpers on header HDR1.
• 100V ‘Line’ can be accepted in J2.
LEDs