Constructor PSGTTL20B, Оригинальное руководство пользователя

Страница: 32 / 57

32
2. Installation of the plant protection arch (Fig. D)
Attach the plant protection bow to the cutting head. Align
the guard so that it slides into the holes on the cutting head.
3 Replacement of the spool and line (fig E1, E2)
▪
Press the sides of the spool cover and remove the
cover
▪
Remove the empty line spool.
▪
Thread the ends of the line on the new line spool
through the eyelets in the spool receptacle.
▪
Fit the spool cover back in the spool holder.
▪
When you start the equipment again the line will be cut
to the perfect length automatically.
4. Setting the auxiliary handle (fig F)
▪
Squeeze the adjustment button of auxiliary handle.
▪
Turn the auxiliary handle until the most balanced and
most comfortable position.
▪
Then tighten the adjustment button of auxiliary handle to
the chosen position.
5. Height adjustment (fig G)
▪
To adjust the height, simply rotate and loosen the collar
extension lock knob as arrow
shown and to extend or retract the extension tube as arrow
shown.
▪
Tighten the extension lock knob to lock the tube on the
selected position.
6. Adjustment the cutting angle ( fig H1, H2)
Your Trimmers has a 3-positions cutting head. This setting
allows you to work effectively at a comfortable working
angle. It can cut accurately around the flower beds, under
bushes, around trees and fence posts etc.
To change the angle, simply press the head angle button of
the cutting head, to the engine block to the desired position,
then release the button.
Warning: remove the battery
pack from the trimmers before
handling setting.