Constructor 5411074212629, Инструкции по эксплуатации и безопасности, Страница: 22 / 39

▪
Ensure that the hose clamps are always tight. Loose or damaged hose clamps can allow
air to escape in an uncontrolled manner.
▪
Replace a damaged hose immediately. A faulty supply line can cause a compressed-air
hose to thrash about and cause personal injury.
▪
Do not breath in the exhaust air directly.
▪
The hose must be designed for at least 150% of the maximum pressure generated in the
system.
▪
The tool and the supply hose must be fitted with a hose coupling that allows the pressure
of the coupling hose to be dispersed completely during disconnection.
▪
Warning! An undersized compressed air system will reduce the efficiency of your
appliance.
▪
Avoid getting exhaust air in your eyes. The exhaust air from the appliance may contain
water, oil, metal particles or impurities from the compressor. This can cause damage to
health.
Take care when putting down the appliance! Always put the appliance
down so it does not lie on the ON/OFF switch. Under certain
circumstances, this could cause an accidental activation of
the appliance which, in turn, could lead to hazards.
▪
The compressor must be used in a suitable environment (well ventilated with an ambient
temperature of b5 °C and +40 °C) and never in places with dust, acids, vapours,
explosive or flammable gases.
▪
Keep the work area free. When operating, the compressor must be placed on a stable
surface.
▪
Safety goggles should be worn when using the compressor in order to protect the eyes
against any foreign bodies lifted by the jet of air.
▪
If possible, when using air-powered accessories, wear safety clothing.
▪
Always maintain a safety distance of at least 2 meters between the compressor and the
work area.
▪
Check for correspondence between the compressor plate data with the actual
specifications of the electrical system. A variation of ± 10% with respect of the rated value is
allowed.
▪
Insert the plug of the electrical cable in a socket of suitable shape, voltage and frequency
complying with current regulations.
▪
Use extension cables with a maximum length of 5 meters and with a cable cross-section
of not less than 1.5 mm². Use of extension cables of different length and cross-section and
also of adapters and multiple sockets should be avoided.
▪
Always use the handle to move the compressor.