21
feature that might affect the operation of the power
tool. If it is damaged, the power tool must be
repaired. Many accidents are caused by using
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
In this manual and/or on the machine the following
symbols are used:
Denotes risk of personal injury
or damage to the tool.
Read manual before use
Always wear hearing
protection
Always wear safety goggles
Always wear a dust mask.
Always wear protective gloves
In accordance with essential
applicable safety standards of
European directives
speed
Function percussion drill
reversible
MACHINE-SPECIFIC SAFETY WARNINGS
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
Protect the battery charger from rain and
moisture. The penetration of water in a battery
charger increases the risk of electric shock.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery, it may create a risk of fire when used with
another battery.
Do not charge other batteries. The battery
charger is suitable only for charging our batteries
within the listed voltage range. Otherwise there is
danger, fire and explosion.
Keep the battery charger clean. Contamination
may cause the danger of electric shock.
Check the battery charger, cable and plug each
time before using. Do not use the battery charger
when defects are detected. Do not open the battery
charger yourself and have it repaired only by
qualified personnel using original spare parts.
Damaged battery chargers, cables and plugs
increase the risk of electric shock.
Do not operate the battery charger on easily
inflammable surfaces (e. g. paper, textiles, etc.) or
in combustible environments. There is danger of fire
due to the heating of the battery charger during
charging.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
Do not open the battery yourself. There is danger
of a short circuit.
Protect the battery against heat, e.g., including
against continuous sun irradiation and fire. There is
a danger of explosion.
Do not short-circuit the battery. There is a danger
of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. In case of