7
SUGGESTION
Information on the product and
suggestions for its use
●
This appliance is intended for domestic use only.
●
Periodically clean the wheels. The dirt which
accumulates on the wheel axis may cause difficulties
in the wheel movement.
●
Move the vacuum cleaner carefully on doorsteps and
uneven surfaces, not to cause an excessive rippling of
the water inside the tank. This might lead to a slight
water overflow.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend
you to:
●
discharge the device by touching metal items in the room
with the pipe,
●
increase air humidity in the room,
●
use widely available antistatic agents.
Appliance features
The vacuum cleaner is intended to pick up dirt from floors,
carpets, ceramic tiles, slots in wood paneling, skirting
boards, heaters. The vacuum cleaner is also used to vacuum
furniture, curtains, to pick up liquids and to wet clean tiles,
floorings, carpets, fitted carpets and upholstery.
Technical parameters
The type of the vacuum cleaner and the technical parameters
are indicated on the rating label. Mains protection 16 A.
Does not interfere with radio and TV reception.
Noise level: 85 dB(A).
Appliance elements
A
1
Handle
2
Container lid opening button
3
Combination brush fastening
4
Plug and cord
5
Accessory compartment
6
Pump operation indicator
7
Pump switch
8
ON/OFF button
9
Power adjustment /-
10
Power level indicator
11
Cord rewind button
12
Clogged air inlet indicator
13
Parquet brush
14
Combination brush with small item separator
15
Turbo brush
16
Small brush
17
Small nozzle
18
Crevice nozzle
19
Telescopic suction tube
20
Suction hose
21
SAFBAG dust bag holder
22
Water filter module:
A
Filtration unit
B
Partition
23
Container
24
Cleaning liquid container
25
Spray unit – suction hose handle attachment
26
Large atomizing nozzle
27
Small atomizing nozzle
28
Water pick up nozzle
29
Rubber slat to the large atomizing nozzle
30
Washing set
31
Foam filter I (installed in the vacuum cleaner)
32
Foam filter II (installed in the vacuum cleaner)
33
Motor filter (installed in the vacuum cleaner)
34
HEPA outlet filter (installed in the vacuum cleaner)
Preparing the vacuum cleaner for
operation
1
Insert the end of the suction hose to the vacuum cleaner
opening so that the markings on the hose end and on the
vacuum cleaner housing are opposite each other and turn
the hose clockwise to the position .
2
Connect the other end of the hose (handle) with the
telescopic suction tube.
3
Hold the ring on the pipe and set chosen length putting it
in or out.
4
Assemble the appropriate nozzle or brush to the other
end of the suction tube.
5
Use the following nozzles and brushes for traditional
vacuum cleaning with the SAFBAG dust bag and vacuum
cleaning with the use of the water filter module: combination
brush with small item separator, small nozzle, small brush,
crevice nozzle, parquet brush or turbo brush.
6
You may assemble a basket for picking up small objects
in the combination brush with small item separator. In order
to do so remove the basket cover and insert the basket.
7
To clean hard surfaces – wooden floors, plastic floors,
ceramic tiles etc. pull out the brush by pressing the switch on
the nozzle according to the figure
.
B
