9
– Press the dust bag board so that the hook caught the board, ensuring the dust bag is correctly installed
in the basket.
– Insert the inner module into back tank and close it with the lid.
VACUUM CLEANER OPERATION WITH SAFBAG
SAFBAG unit construction:
When using SAFBAG unit it is not allowed to pick up:
– liquids,
– hot ash,
– cigarettes and matches,
– sharp and hard objects,
–
pieces of glass, cement, stone dust, flour, etc.
Preparation for cleaning:
–
Open the tank lid (as in case of water filter).
– Remove the inner module (board, basket,
plug, air-inlet filter and SAFBAG bag).
–
Check if SAFBAG bag and air-inlet are
properly assembled (see air-inlet filter
exchange).
– Insert the inner module into the tank and
assemble the lid.
–
Remove the complete water filter unit.
–
Replace the water filter unit with SAFBAG
bag unit.
ATTENTION!!! It is absolutely forbidden to vacuum without the bag and inlet filter or with damaged
bag. It can cause engine damage.
Bag and filters control
1. SAFBAG bag.
– As the bag is not equipped with full bag indicator, it is necessary to control
that status. Replace it with a new one, when it is completely full.
SAFBAG bag exchange:
– Open the tank lid and remove the inner module.
–
Lean the flexible board hook and disassemble the bag board.
–
Pulling the SAFBAG bard, remove it from the basket.
–
Replace full or damaged SAFBAG bag with a new one.
–
Hold the bag bard and put it between the fins in the
basket (sequence 1 and 2) according to assembling
direction, defined by arrows printed on the bag.
819-141C_v01
