Constellation Altair II, Руководство пользователя, Страница: 12 / 19

12
15. Return/back
This button brings you back to the previous control screen. For example, from any input’s screen, such
as XLR 1, it will take you back to the input selector screen.
16. Standby/power
Push this button to turn the Altair II on and off. When you turn the unit on, it will take a few seconds
for the power supply and preamp to warm up. When the preamp is ready for use, its LCD screen will
show the most recently selected input, and the blue LED on the front of the power supply will come
on. To put the unit in Standby mode—which will silence the audio but keep the power supply on so the
unit stays warmed up—press this button again after turning on the power.
Hold this button down for 5 seconds to turn the preamp off. The unit will enter cool-down mode for 10
seconds. During cool-down, no buttons on the unit or remote will operate.
17. Multifunction button
The multifunction button serves different functions depending on which control screen is shown. A
label on the LCD display will show the function of the button.
18. Mute
Press this to button to silence the Altair II temporarily. The numerical volume readout will flash. Press
again to restore the audio. Because the Altair II uses a relay to perform the mute function, it may take
a second or so for this control to respond.