Standby
This screen appears if you touch the touchscreen when the rear-panel master
power switch is flipped up. Pushing the onscreen Power button (or the Standby
button on the remote) will power up the Inspiration Integrated and put it into
warmup mode.
Powering on
This screen appears after you press the onscreen Power button or the Standby
button on the remote while the Inspiration Integrated is powered down. It indi-
cates that the Inspiration Integrated is in warmup mode. No buttons will func-
tion when this screen appears. After about 10 seconds, the Inspiration Integrated
will become active and an input screen will appear.
Powering off
This screen appears for about 10 seconds if you push the Standby button under
the middle of the front touchscreen or on the remote while the Inspiration Inte-
grated is powered on. It indicates that the amplifier is powering off and going
into Standby mode. No buttons will function when the screen appears.
Input selector (Home)
This screen appears when the power is on and the unit is warmed up. Touching
any input button onscreen will switch to that input. The setup screen can be ac-
cessed from this screen using the multifunction button below the display.
Volume/balance
When you select an input, this screen will appear. It provides a large volume
display as well as the display for the balance control. The balance control
functions only when this screen is shown. Pushing the multifunction button
under the Setup label enters the input setup screen.
Note that when the input screen is displayed, the output of the Inspiration
Integrated can be set for speakers or headphones. The fourth indicator on the
lower part of the touchscreen (identified by the red arrow in the screen at right)
shows whether speakers or headphones
are selected.
Control screens
Many functions of the Inspiration Integrated are controlled through the LCD touchscreen.
Here is how the control screens function:
Содержание Inspiration INTEGRATED 1.0
Страница 1: ......
