3
SLPB
SLTI
SLVT
Please refer to the SL user and operating
instructions for full operational details.
SL wireless controllers
Wall mounting
Operation
62001231 Iss 01
This heater can only be used when connected to any SL wireless controller. Each SL controller can
control any number of heaters providing they are in the RF range.
When the appliance is connected to the mains supply, the LED indicator will light up green, showing
that the power is available to the unit.
When the heat output has been enabled by a controller, the LED indicator light will turn red.
The heater must not be located immediately below a fixed socket outlet. The wall
mounting bracket is packed separately in the carton. Fit the mounting bracket to the
wall at the height and centers shown in the diagram.
Rest your appliance on the bottom of the mounting bracket and secure with the two
top locking screws including the plain washers. Do not over tighten. Now secure the
appliance with two bottom locking screws including plain washers. Do not over
tighten.
CSL2(M)LST
SLVTB
