3
I3984133 Iss 05
9. PROG - Automatic time mode
In this mode, the CRXSL will follow the week’s time / temperature programme.
You can override the temperature in
PROG
mode by simply activating the CRXSL and using the or buttons to set the
new temperature. The new set temperature will be then maintained until the next programme step.
Press to
ADVANCE
to next programme number, press again to go back.
Programme time format defaults to weekday/weekend setting.
This lets you set a programme of up to 6 programming steps which will operate on Monday, Tuesday, Wednesday, Thursday
and Friday, and another programme of up to 6 programming steps which will operate on Saturday and Sunday.
Programme time format can also be set to 7 day format for full control of programmes on every day, or 24 hour format to use
the same programme every day.
This can be adjusted in the setup menu (see section 23). Setting 13 can be toggled between 5d2, 7d or 24h.
10. Set programme
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day programme on CRXSL
- SET HOURS FOR PROGRAMME
- SELECT DAY TO SET
- SET MINUTES FOR PROGRAMME
- SELECT PROGRAMME TO SET
- SET TEMPERATURE FOR PROGRAMME
Logic diagram for setting programme on CRXSL
1. To set up the heating programme the CRXSL has to
be in PROG mode.
2. Press and hold for 5 seconds.
Programme mode is now displayed, with the
displayed day/days flashing.
3. Press or to select the day (in 7 day mode) or
group of days (in other modes) you want to set.
4. Press to confirm day.
The programme number is now shown flashing.
5. Press or to select programme step number.
6. Press to enable/disable selected program.
7. Press to confirm programme number.
The minute display is now shown flashing.
8. Press or to set minutes in 15 minute increments.
9. Press to confirm minutes.
The hour display is now shown flashing.
10. Press or to set hour.
11. Press to confirm hours.
The programme temperature is now shown flashing.
12. Press or to set temperature.
13.
Press to confirm temperature.
This programme is now set
The day/days is shown flashing ready for the next
programme.
14. Wait 20 seconds to automatically exit programming
11. Set programme active / inactive
In programming mode, select the programme you want to
make active or inactive. Press to toggle between settings.
E.g. Programme 3 inactive
Programme 3 active
