Installation
3
66001141 Iss 01
3
Part Number
Watts
Width (mm)
Height (mm)
Depth (mm)
CN2MLSTiERF
2000
730
360
123
Fig.1
Mounting Instructions.
Located on the rear of the heater are two key-hole slots used for wall mounting. Attach screws to the wall
following the recommended clearances in figure 1.
Remove the two wall brackets that are screwed to the bottom of the heater. Rotate them 180 degrees as
shown in figure 1.
Install the heater on the two screws, ensuring it drops into the two locating slots and is tight against the wall.
With the heater in position, mark the holes for each of the bottom brackets. Screw the bottom brackets to
the wall.
