4
62001251 Iss 02
C
USTOMER
H
ELPLINE
Should you need any advice on the use of your new Consort product please contact our Helpline:
Consort Equipment Products Limited
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Tel: 01646 692172 Fax: 01646 695195 Email: [email protected] Web: www.consortepl.com
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
BS EN ISO 9001 Registered Company No FM12671
The heater must not be located immediately below a fixed socket outlet. The Wall
Mounting bracket is packed separately in the carton. Fit the top mounting brackets
to the wall at the height and centers shown in the diagram.
Remove the two feet-securing screws from the base of the heater and use these
screws to secure the right-angled bracket to the base of the rear panel of the heater
in the correct holes. These are the holes in the two protruding lugs. Mount your appli-
ance onto the top brackets via the two slots in the rear panel. Secure the bottom
brackets to the wall as shown.
Wall mounting
