Consonics CyberTek Qualifier, Руководство пользователя

Страница: 9 / 19

Qualifier Supplement
5
Hardware Installation
Install Transmitter
Mount Transmitter
Vehicular Device
Consists of:
Vehicular Mounted Receiver/Transmitter
Mount in an environmentally protected area of the vehicle
Mount with visibility to LED indicators
Receiver/Transmitter Powers from Vehicle
Transmitter produces output signal with unique signature
Transmitter can be factory set to one of three FCC approved frequencies
Transmitter switches between three fixed output power settings as controlled by the
receiver section and commanded by the handheld device
Receiver section receives commands from handheld device
Turn transmitter on / off
Select transmitter output power
Power Transmitter
Wiring Harness for Receiver/Transmitter
Connect harness to battery of vehicle
Harness contains protection fuse
Maintain proper fuse rating
Protect harness from nicks, pinches, chaffing, damage.
Install Antenna
Mount Antenna
Route Antenna Cable
Vehicular Magnetic Mount Dual Band Antenna
50 ohm cable permanently connected to antenna
BNC connector to receiver/transmitter
Protect antenna cable from nicks, pinches, chaffing, damage
Place antenna in center of vehicle roof, clear of metallic objects
Metallic objects on vehicle roof may cause improper operation of the system