4
FIRST SETUP
Once the system is operational and you have connected to it through your network or via the
hotspot, you will reach Opera's web-UI.
The first time please click on the cog-wheel
in the top right part of the UI, select system and
click on "Run first config Wizard", a helper will assist you to configure Ref 8 Pro 25
th
Anniversary.
Any configuration done in this phase can be later reverted.
Those are the first configuration steps:
LANGUAGE:
Select your desired operational language.
NAME:
Give your Ref 8 Pro 25
th
Anniversary
a unique name like “Living Room”, “Studio” etc. This
will be useful to identify your Ref 8 Pro 25
th
Anniversary in case you have more than one. The
default name is “Opera”.
OUTPUT:
Select the desired audio output: OPERAAUDIO USB Audio.
NETWORK:
If you wish to configure your Ref 8 Pro 25
th
Anniversary to connect to your Wireless
Network, here you will be able to see all available wireless network and connect to them. In case
of Hotspot operation, Ref 8 Pro 25
th
Anniversary will connect to the wireless network after the
Setup Wizard has been terminated. In this case, you must find it’s IP address again (see
Connection to the Unit section).
MUSIC:
You can configure a Network Attached Storage for music retrieval or connect a USB
Drive with your music.
Once the first setup has been completed, your Ref 8 Pro 25
th
Anniversary is ready.
FIRST STEPS WITH OPERA
Depending on the device used to connect to Ref 8 Pro 25
th
Anniversary, a desktop or mobile
version of the User Interface is shown. Both provide same features, but ergonomic is different to
best fit with the use (mobile or desktop).
