Consonance Droplet LP3.1 Скачать руководство пользователя страница 5

Страница: 5 / 6

last step: Use the adjustable

feet of the turntable to level the

turntable using the extra spirit

level.

TECHNICAL
SPECIFICATION

Wow and Flutter: Less than 0.02

Rumble: Greater than 80dB down

Speed accuracy: Within 0.01%

Motor AC power :

100V~240V 50Hz / 60Hz AC

dependent on country.

USE & PLACEMENT

The Consonance LP3.1 should be placed on a flat, hard surface for proper standing. The turntable

performs best after being switched on for 5 minutes for running smooth. A certain space is required for

tonearm moving above the turntable on the right side. The turntable must never be placed on a soft or

unstable base. Nor must it be covered while in use or placed on a narrow shelf or in another confined

space.

CLEANING

The base of the turntable and turnarm as well as the motor are made of solid, powder coated aluminum.

Fingerprints can be removed with a cloth moistened with warm water. A silk cover would be the best

keeping dust away from the whole LP system.

NOTE & WARNING

Opening of the product by non-authorized personnel will void the guarantee.

The products must not be exposed to rain or moisture.

Motor should only be opened or serviced by certified technicians. The devices contain electronic

components that can cause severe electric shock. Work performed on Consonance products by

unqualified personnel can cause serious damage and personal injury.

Содержание Droplet LP3.1






