CONSET 501-47, Инструкция по сборке

Страница: 3 / 12

5. Maintenance and defects
The table does not require any maintenance by usage as described in chapter 2 in the directions for use. •
The table is only to be maintained with a damp cloth •
In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact the dealer. •
6. Technical data
Frame, materials Steel, powder lacquered / Chrome
Weight 25 - 43 kg
Width 112 - 342 cm
Depth 75 cm
Height 66 - 116 cm
Max. load 150 kg
Speed 25 mm/sec. unloaded
Duty cycle 10% by 50% of max. load on frame or max. 2 min. contiuouesly
Operation Micro switches
Voltage 100-240 VAC | 50/60 Hz
Standby Consumption <0,15 Watt
7. Parts
See page 4, 2 leg frame.
See page 8, 3 leg frame.
8. Assembly instructions
See page 5 - 7, 2 leg frame.
See page 9 - 12, 3 leg frame.
9. Declaration of conformity
We hereby declare, under our sole responsibility that the following products:
Sit and stand table product type 501-47 •
is in accordance with:
Directive 2006/42/EF of The European Parliament and of the Council of 17 May 2006 on machinery •
With reference to the above please be aware that:
the sit and stand table is considered a machine and •
the sit and stand table may not be used until it has been assembled and installed according to the instructions. •
Manufacturer
ConSet A/S | Industrivej 23 | 6900 Skjern | Denmark
www.conset.com | Tlf.: +45 96800080 | conset@conset.com
3