CONSET 501-23, Инструкция по сборке и руководство пользователя

Страница: 3 / 8

5. Maintenance and defects
The table does not require any maintenance by usage as described in chapter 2 in the directions for use. •
The table is only to be maintained with a damp cloth •
In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact the dealer. •
6. Technical data
Frame, materials Steel, powder lacquered
Weight, frame 45 kg
Width, frame 132-192 cm
Depth, frame 66 cm
Height 68-120 cm
Max. load 175 kg
Speed 22 mm/sec. unloaded
Duty cycle 10% by 50% of max. load on frame or max. 2 min. contiuouesly
Operation Micro switches
Voltage 100-240 VAC | 50/60 Hz
Standby Consumption <0,15 Watt
7. Parts
See page 4.
8. Assembly instructions
See page 5 - 6.
9. Declaration of conformity
We hereby declare, under our sole responsibility that the following products:
Sit and stand table product type 501-23 •
is in accordance with:
DIRECTIVE 2006/42/EF OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 17 May 2006 on machinery and on changes of
directive 95/16/EF.
•
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonization of
the laws of the Member States relating to electromagnetic compatibility.
•
DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (recast).
•
With reference to the above please be aware that:
the sit and stand table is considered a machine and •
the sit and stand table may not be used until it has been assembled and installed according to the instructions. •
Manufacturer
ConSet A/S | Industrivej 23 | 6900 Skjern | Denmark
www.conset.com | Tlf.: +45 96800080 | conset@conset.com
3