USER MANUAL
Ⅷ
.
CAUTION DURING OPERATION
1 ) When connecting interface, please connect with communication interface first, then power
interface. And then power on.
2
3
4
) To make your product safe, the input voltage please not above 40V.
) Please set BPS rate correct. EX-work set is 9600bps.
) During operation, card insert direction should be correct
a) When inserting magnetic card, magnetic stripe should face down and insert on the right side.
b) When inserting IC card, chip should face up. If insert from the front, the end close to chip
should be inserted into card reader first. If insert from the rear, the end away from chip should
be inserted into card reader first.
c) When inserting RF card, directions are not considered. But it can only be operated at RF
position.
5 ) When there is card in the machine, error message will be given if inserting card again. And motor
door will not open.
6
7
) When shutting off power, power interface should be shut off first, then communication interface.
) Power off during operation or other abnormal reason lead to card staying in the machine and
cannot be taken out, please take out card by pulling belts manually.
8 ) Disassembly method Drawing
2 . Tap down lower
main body
3 . Pull backward
lower main body
with right hand
1 . Push and open the clips
beside the card mouth to
take off card mouth
4 . Pull forward upper
main body with left
hand
Page 8 of 9
QU-CM-5510/-2
