Operation
Always switch the device off before opening the cover.
• Open the zip on the cover, and then unfold the cover.
• Place the storage tray on the bottom of the disinfection box.
This ensures that the UV light can reach the underside of the object to be disin-
fected.
• Place the object that you want to disinfect as centrally as possible on the storage rack.
• Close the cover and fasten the zip.
• When the power supply is connected, the button will light up.
• Hold down the button to switch the device on.
• The device will start the disinfection process.
• During disinfection, the button will flash and you will be able to see the UV light in the
window below the button.
• The process takes approx. 3 minutes, after which the light on the button will switch off.
The disinfection process can also be interrupted by briefly pressing the button.
• Open the zip on the cover, and then unfold the cover.
• Remove the disinfected object.
a) LED indicators overview
LED indicator
Function
off
switched off
flashes
disinfection process active
steady on
power supply connected
b) Examples of disinfected objects
• Small textiles such as socks, gloves, underwear, baby towels, etc.
• Cosmetic items, such as brushes and sponges
• Small electronics such as mobile phones, MP3 players, small tablets, hearing aids, computer
mice, etc.
• Metal items, such as keys and watches
• Kitchen utensils, such as cups and cutlery
• Jewellery, glasses, bracelets
Care and cleaning
Disconnect the device from the power supply before each cleaning session. Do not
immerse the product in water.
Never use aggressive detergents, rubbing alcohol, organic solvents or other
chemical solutions, as these may damage the device or prevent it from functioning
properly.
• Wipe the inside and outside of the disinfection box with a dry or slightly damp cloth and then
wipe it dry, if necessary.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with ap-
plicable regulatory guidelines.
Technical data
Operating voltage .................................5V/DC
Power consumption ..............................max. 1 A
Disinfection cycle ..................................approx. 3 minutes
UV-C LEDs ...........................................12
Lifespan of the UV-C LEDs ...................Approx. 15000 hrs
UV wavelength .....................................270/280 nm
Weight ..................................................approx. 453 g (without accessories)
Dimensions ...........................................260 x 200 x 150 mm
Connection cable ..................................93 cm
Operating conditions .............................-20 to +50 °C/20–80 % relative humidity
Storage conditions ................................-20 to +45 °C / 20–80 % relative humidity
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
2388644_v1_1021_02_VTP_m_en
