a) Shredding paper
Do not insert more than 8 sheets of paper (size DIN A4 with a maximum grammage of 80 g/m
2
) into the
insertion slot.
Do not shred adhesive notes or paper with remains of adhesive.
• Slide the selector switch to the left into the “AUTO” position.
• Now, carefully insert the paper into the paper/credit card insertion slot. The paper will automatically be fed in and shredded.
•
When finished, slide the selector switch to the central position “OFF”.
b) Shredding credit cards
Shred only one credit card at a time.
• Slide the selector switch to the left into the “AUTO” position.
• Now, carefully insert a single credit card into the paper/credit card insertion slot. The credit card will be fed in and shredded.
•
When finished, slide the selector switch to the central position “OFF”.
c) Shredding CDs
Shred only one CD at a time.
•
Attach the small collection container onto the retaining fixture within the collection container.
• Slide the selector switch to the right, into the “CD REV” position. The motor is now permanently turned on.
•
Next, carefully insert a single CD into the CD insertion slot. The CD will be fed in and shredded.
•
When finished, slide the selector switch to the central position “OFF”.
d) Clearing paper jams
• Slide the selector switch to the right, into the “CD REV” position.
• The cutting unit will now run in the reverse direction and push the jammed paper out again.
•
When finished, slide the selector switch to the central position “OFF”.
Troubleshooting
Problem
Cause
Solution
The cutting unit continuously keeps
on running in the “AUTO” position.
The paper container is full and the
paper from the cutting unit cannot
feed through.
Unplug the mains plug and empty
the container.
After shredding, there are still pieces
of paper remaining in the cutting unit.
The remaining pieces of paper are
stuck between blades.
Slide the selector switch into the
“CD REV” position.
The automatic feed stops, however
there is still paper in the insertion slot.
The paper was inserted into the
insertion slot at an angle.
Ensure the paper is straight as it goes
into the insertion slot.
The paper is too soft, thin, damp or
creased.
Fold, dry or flatten the paper.
The device does not work, although
no pieces of paper remain in the
feeder.
The motor is overheated.
Leave the device to cool down before
putting it into operation again.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its
service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ............................................230 V/AC, 50 Hz
Power consumption .........................................
max. 1.5 A
Safety level ......................................................3 (DIN 32757)
Noise level .......................................................72 dB
Shredding speed .............................................2 m/min
Container volume ............................................
15 l (paper/credit card)
0.8 l (CD)
Operating temperature ....................................
-10 to +85 ºC
Blade clearance ...............................................4 mm (paper/credit card)
40 mm (CD)
Insertion slot width ...........................................220 mm (paper/credit card)
123 mm (CD)
Cable length ....................................................
1.2 m
Dimensions (W x H x D)
..................................
315 x 320 x 195 mm
Weight .............................................................4 kg
Operating instructions
Document shredder IPS080D
Item no. 883485
Intended use
This product is designed for shredding paper, CDs and credit cards. The separate collection container allows the separation of
shredded CDs from shredded paper and credit cards. Power is supplied via a standard mains socket (230 V/AC, 50 Hz). The
product should only be used in dry indoor areas.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can cause hazards such as short
circuiting, fire, electric shock etc. Read the instructions carefully and keep them. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and product names are
trademarks of their respective owners. All rights reserved.
Delivery content
• Document shredder
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads
or scan the printed QR code. Follow
the instructions on the website.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not
follow the safety instructions and information on proper handling in this manual, we assume no liability
for any resulting personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• Do not reach into the feeder slot.
• Do not insert paper pin, staples or any other metal parts into the feeder slot.
• Keep long hair away from around the feeder slot.
• Keep ties, scarves, loose clothing and long necklaces or bracelets away from the feeder slot.
• Do not use spray bottles / cans in the immediate vicinity of the product.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Unplug the mains plug from the mains outlet before cleaning the product or storing it for a longer period.
• Do not operate the device for longer than two minutes to avoid overheating the motor.
• The product should not be connected immediately after it has been brought from an area of cold temperature
to an area of warm temperature. Condensed water might destroy the product. Wait until the product stabilising
to adapt to the new ambient temperature before use.
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical support
service or other technical personnel.
Operating elements
REV
CD
OFF
AUTO
MAX.8 Sheets/one time (A4)
1
2
3
1
Selector switch
2 CD insertion slot
3 Paper/credit card insertion slot
Operation
• Place the shredder on a level surface.
• Plug the mains plug into a mains socket.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*883485_v2_0516_02_IPL_m_en