Control horn
...................2
2x30mm screw
..........4
......2
X
Aileron servo
extension
cord
Aileron servo / Querruder servo
TOP
Flap servo hatch
Flap push rod
Push rod exit
1- Place the flap servo onto the servo mounts and secure it in place using the four screws included with the servo.
2- Install the flap push rod connector onto the hole in the flap servo arm and insert the push rod through the push rod
connector.
3- Place the flap servo hatch in its mount and secure it in place using four 2x10mm screws.
L/R
CAUTION: one of the flap servos is revert servo
2x10mm screw
20- Servo installation / Servoeinbau
5/64(2x10mm)
screw
5/64(2x10mm)
screw
Flap servo hatch
Flap servo
Servo mount
Aileron servo hatch
Aileron servo
Servo mount
WING BOTTOM
WING BOTTOM
Aileron servo hatch
Aileron push rod
Aileron control horn
21- Linkages / Anlenkungen
Wing - Bottom view / Unteransicht
BOTTOM
BOTTOM - VIEW /
Unteransicht
