38
g) Select Language for OSD Menus (Function “Language”)
• In the main menu, select the function “Language” with the arrows and confirm your selection
with “ENTER”.
• Select the desired language for the OSD menus in the LC display with the arrow buttons and
confirm your selection with “ENTER”. Then the main menu appears again.
h) Switch USB Mode (Function “USB Mode”)
If the film scanner is connected to a computer, two different operating modes are possible.
1.The film scanner is supplied with power through a computer (e.g. if you do not wish to use
the included mains adapter or batteries)
2.The internal storage or any inserted memory card is logged on to the computer as a drive
so that you can copy the images onto the computer. In this operating mode, all other film
scanner functions are deactivated.
Proceed as follows:
• In the main menu, select the function “USB MSDC” with the arrows and confirm your
selection with “ENTER”.