Laser Pointer Green and Red
Version 12/12
Best.-Nr. 77 55 27
1. Intended use
The product emits green and red laser beams. They can be used to highlight details on objects, presentation
boards etc.. The product must be powered by batteries.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, fire, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
This product complies with the statutory national and European requirements. All company names and product
names are trademarks of their respective owners. All rights reserved.
2. Content of delivery
• Laser pointer
• 2 x AAA batteries
• Case
• Operating instructions
3. Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Laser
• When operating the device, always make sure that the laser beam is directed so that no one is in the
projection area and that unintentionally reflected beams (e.g., from reflective objects) cannot be directed
into areas where people are present.
• Never look into the laser beam and never point it at people or animals. Laser radiation can seriously
damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out tasks with safety implications,
such as working with machines, working from great heights or close to high voltage. Also, do not operate
any vehicles until the irritation has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncontrolled, reflected beam may
strike people or animals.
• Never open the device. Setting or maintenance tasks must only be executed by a trained specialist familiar
with potential hazards. Improperly executed adjustments might result in dangerous laser radiation.
• Caution: if operation settings or procedures other than those described in these instructions are
used, it could lead to exposure to dangerous radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages are included in the package.
If the sign on the laser is not written in the language of your country, please affix the appropriate sign onto
the laser.
ATTENTION
LASER RADIATION
DO NOT STARE
INTO THE BEAM
LASER DIODE
Wavelength:
532 nm / 630 - 680 nm
Max. output power:
< 1 mW
CLASS 2
LASER PRODUCT
EN 60825-1:2007
(Rechargeable) batteries
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged (rechargeable) batteries might cause acid burns when
in contact with skin, therefore use suitable protective gloves to handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave (rechargeable) batteries lying
around, as there is risk, that children or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable)
batteries in the device can lead to (rechargeable) battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4. Operating elements
1
2
3
4
5 6
1 Battery compartment cap
4 Green laser button
2 Clip
5 Green laser aperture
3 Red laser button
6 Red laser aperture
5. Insert / change batteries
1. Turn the battery compartment cap (1) counterclockwise to open the battery compartment.
2. Insert two AAA batteries into the battery compartment while observing the polarity (“+” = positive;
“–” = negative). The positive pole of the battery should face outward.
3. Close the battery compartment.
6. Operation
Never point the laser beam directly on persons or animals.
• Press and hold the green laser button (4) to activate the green laser beam. The green laser beam will
emerge from the aperture (5).
• Press and hold the red laser button (3) to activate the red laser beam. The red laser beam will emerge
from the aperture (6).
7. Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.
(Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries.
Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal in the
domestic waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or
wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
8. Technical data
Operating voltage:
3 V/DC (2 x AAA batteries)
Current consumption:
max. 230 mA
Emitted laser wavelength: 532 nm (green)
630 - 680 nm (red)
Laser output:
max. 1 mW
Laser class:
2
Operating temperature:
+15 to +35 ºC
Operating humidity:
40 - 85 % relative humidity, non-condensing
Dimensions:
ø15 x 160 mm
Weight:
77 g
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
© 2012 by Conrad Electronic SE.
V2_1212_02-KV