Conrad 754270, Руководство по эксплуатации

Страница: 67 / 188

67
To start a recording in "MANUAL" mode, push the button "REC/DEL" (9) once.
The record can be sopped again no earlier than 30 seconds after starting the recording. To stop a recor-
ding, push the button "REC/DEL" (9) once.
Ꮨ
Always switch off the system before removing the memory card from the indoor unit!
In "SCHEDULE"-mode, the system will automatically continue 60 seconds after the recording was
manually terminated.
In "MOTION" mode, the motion detection will start again after 60 seconds if the recording was manually
terminated.
The recording must be stopped before you can call the main menu. If no other input is made for 2 minutes,
the system automatically switches back to "QUAD" mode.
"MOTION DETECTION SENSITIVITY" (Setting the Sensitivity for Motion Detection)
Use the arrows (4), (5), (3) and (7) to select the function "RECORDER SETUP" and
push the "MENU" button (5).
Use the arrows (3) and (7) to select the menu item "MOTION DETEC-TION SENSITIVITY" to set
the sensitivity for motion detection at the left edge.
Use the arrows (4) and (5) to select the desired surveillance camera (1 - 4) in the right fields.
Use the arrows (3) and (7) to adjust sensitivity: "OFF" / "LV1" / "LV2" / "LV3" ("LV3" is the most
sensitive setting).
Push the "ESC" button (8) to save the settings and leave the menu.