54
12.4 “Alarm” menu
Displays the “Alarm” menu
a) Alarm duration
The ALARM DURATION settings can be used to deter-
mine how long the ALARM relay output at the “connection
terminal” (28) is to be activated after motion was detected
or a sensor triggered.
b) Buzzer duration
This setting can be used to determine how long the internal acoustic alarm is to be activated after motion
was detected or a sensor triggered.
The following settings are possible:
OFF
(= acoustic alarm is deactivated
5, 10, 15, 20, 25, 30 (= time of the acoustic alarm in seconds)
CONT (= continuous acoustic alarm that can only be activated if a button is pressed)
c) Event REC duration
Indicates for how long (seconds) a recording is to run after motion detection or after it is triggered by the
sensor.
d) Sensor
In this menu, you can set the type of contact for the respective sensors connected to the “connection ter-
minal” (28).
Possible settings:
NONE (= no sensor connected)
N.O (= NO contact sensor connected)
N.C (= NC contact sensor connected)
e) Motion detection
Channel:
Video channel selection.