Maintenance and Care
The product does not require any maintenance and should never be opened or disassembled
for any reason.
Remove connected consumer loads from the radio controlled socket and remove it from the
mains socket, before cleaning the product.
Only clean the product with a soft, clean, dry cloth. Never use aggressive cleaning agents or
chemical solutions since these might damage the surface of the casing or impair the operation.
Handling
Ꮨ
• The radio controlled socket is only intended for use in dry indoor locations.
• Do not expose the product to the following unfavourable ambient conditions at the
site of installation or during the transport:
- Humidity and damp
- Direct sunlight
- Extreme cold or heat
- Dust or flammable gases, fumes or solvents
- Strong vibrations
- Strong magnetic fields such as those found in the vicinity of machinery or loud-
speakers
• Ensure that the insulation for the entire product is neither damaged nor destroyed.
Never disassemble the product! There are no serviceable parts inside.
• Check the product for damage before use!
If you notice any damage, do not use the product any longer!
There is a risk of a life-threatening electric shock!
Safe operation must be presumed to be no longer possible:
- if the device is visibly damaged
- if the device no longer works
- if the device was stored under unfavourable conditions for a long period of time
- if the device was exposed to extraordinary stress caused by transport.
Transmission range
The transmission range of the radio signals between the radio transmitter and the radio con-
trolled socket is up to 70 m under optimum conditions.
☞
This value, however, is the so-called „open space range“ (range the trans-
mitter and receiver are visible to each other, without interfering influences).
In practical operation, however, there are walls, ceilings of rooms etc.
between the transmitter and the receiver, which reduce the range accord-
ingly.
Due to the different influences on the radio transmission, no specific range
can be guaranteed.
However, trouble-free operation is usually possible in a detached house.
The range can sometimes be limited considerably by:
• walls, reinforced concrete ceilings
• coated/metallised insulated glass
• proximity to metal & conducting objects (e.g. radiators)
• proximity to human bodies
• Broadband interferences, e.g. in residential areas (DECT telephones, mobile phones, radio-
controlled headphones, radio-controlled speakers, radio-controlled weather stations, baby
phones etc.)
• Proximity to electric motors, transformers, power-supply units, computers
• The proximity to improperly shielded or uncovered operating computers or other electric appli-
ances
Disposal
a) In general
Please dispose of the device when it is no longer of use, according to the current
statutory requirements.
b) Batteries and rechargeable batteries
As the end user, you are required by law (Battery Ordinance) to return all used batter-
ies/rechargeable batteries; disposal of them in the household waste is prohibited!
Batteries that contain pollutants, or rechargeable batteries with the symbol depicted
here, cannot be disposed of with the normal household garbage. The designations
for the respective hazardous heavy metals are Cd = cadmium, Hg = mercury, Pb =
lead.
Used batteries, rechargeable batteries as well as coin cells can be returned to col-
lection points in your municipality, our stores or wherever batteries/rechargeable
batteries/coin cells are sold!
You thus fulfil the legal requirements and make your contribution to protecting the environment!
Declaration of Conformity
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that the
product conforms to the fundamental requirements and the other relevant regulations of
Directive 1999/5/EC.
☞
You can find the declaration of conformity at www.conrad.com.
Technical Data
Reception frequency:
433MHz
Operating voltage:
230V~/50Hz
Protection class:
I
Connected power:
max. 2000 watts ohm resistive load;
max. 600 watts inductive load
LED:
Lights up, when the mains socket/consumer load is activated
Dimensions (L x W x H):
approx. 116 x 58 x 73 mm
Operating temperature:
0°C to 35°C
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or
the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
©
Copyright 2011 by Conrad Electronic SE.
