Tips & notes
• If there is a network or system administrator for your network (as will probably be the case in
a larger company), please let the administrator assume the responsibility for connection and
wiring. Do not connect the camera yourself!
• The IR LED automatically switches on when it is getting dark; the IR light is not visible to the
human eye. Keep in mind that night vision images may only be displayed in black and white
and not in colour.
• For further information, see the manufacturer’s operating instructions on the enclosed CD.
Maintenance and cleaning
The product is maintenance-free.
To clean the product, use a dry, clean and soft cloth. Before cleaning, disconnect the product
from the power supply; unplug the power adapter from the mains socket.
Clean the lens very carefully to avoid scratch marks.
Do not use aggressive detergents as these might cause discolouration of the casing.
Declaration of conformity (DOC)
The manufacturer hereby declares that this product conforms to the fundamental requirements
and the other relevant regulations of Directive 1999/5/EC.
The Declaration of Conformity for this product is available at www.conrad.com.
Disposal
The product must not be disposed of in the household waste.
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Technical data
a) Camera
Operating voltage .........................12 V/DC
Image sensor ................................8.5 mm (1/3”), CMOS
Sensor resolution .........................1280 x 720 Pixel
Camera aperture angle .................70° (horizontal)
Focal length ..................................2.8 mm
IR LEDs ........................................1 (High-Power)
IR range ........................................up to 20 m
WLAN ...........................................802.11b/g/n
LAN ...............................................10/100 Mbit
Protection class ............................IP66
Mounting location ......................... indoor/outdoor area (the connectors or the button at the end
of the cable must be located in the dry indoor area)
Ambient conditions ....................... temperature -20 °C to +50 °C, relative humidity 10% to 85%
Dimensions ...................................155 x 92 x 86 mm (H x W x D, without bracket/antenna)
b) Wall plug transformer
Operating voltage .........................100 - 240 V/AC, 50/60 Hz
Output ...........................................12 V/DC, 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2015 by Conrad Electronic SE.
• When you start the software (previously installed or copied to your computer) it will search the
network for available cameras.
Please note: There must be a DHCP server activated in your network (e.g., the
DHCP server in a router). Your PC must be configured so that it assigns an IP ad-
dress automatically.
Depending on the security settings of your Windows, a Windows Firewall warning
will appear. The access of the software must be authorised, otherwise the product
cannot be used.
When the camera is shown with its respective IP address, double-click on it.
• You will be prompted to enter your username and password. Enter the username: “admin” (in
lower case and without quotations). Do not enter anything into the password field.
• Click “OK”, and in the next window, click the “Sign in” button or equivalent, depending on
which internet browser you are using.
• Depending on your operating system, web browser and existing security settings, a system
message will appear on start-up that a software installation is required. This software is ab-
solutely necessary for the camera image to be shown.
Furthermore, it may be necessary to make modifications to the settings for the antivirus or
firewall programmes before the software will function properly.
Unfortunately, due to the variety of programmes, a description of the precise procedure of the
procedure is not possible.
Further information regarding the software can be found in the manufacturer’s op-
erating manual in English on the CD enclosed. This is available in “PDF“ format. To
view the PDF file, you need an appropriate PDF viewer such as “Acrobat Reader”,
which you can download free of charge at www.adobe.com.
Connection via WLAN
Several settings have to be made in the camera’s menu, before a connection via
WLAN can take place.
Therefore, the camera must first be connected via a RJ45 network cable to your
network (see the previous section for the procedure) and to be set up for WLAN
operation. You can then configure the required settings in the software/camera set-
tings.
For example, you must select encoding, enter the WLAN password, set the cam-
era’s WLAN-IP address, etc.
Only then is a WLAN operation possible!
Like many other WLAN devices the settings depend on the available WLAN hardware and its
configuration.
Due to the variety of different devices and their configurations, a description of the
exact procedure for installing the camera is not possible.
The setting of the camera via WLAN as well as the available WLAN devices require
specialist network knowledge.
Take note of the manufacturer’s original operating manual on the CD included in the
delivery.
Assembly
After a successful start-up, the camera can be installed at the desired location on a wall using
the mounting bracket provided.
Pay attention when drilling and tightening the screws that no cables or pipes are damaged!
The connectors at the end of the cable (RJ45, low-voltage connector) and the button
must not get damp or wet, otherwise they will be damaged (corrosion by humidity).
The product must not get damp or wet as there is danger of a fatal electric shock!
The maximum length of the network cable between the camera and router/switch is 100 m.
Only use at least so-called CAT5- or CAT5e cables.
If you use a WLAN connection it is recommended to test the reception first before mounting
the camera.
Proximity to metal parts, cables or electrical/electronic devices have a negative influence on
the camera’s range.