Conrad-johnson design PV 7 Скачать руководство пользователя страница 3

LIMITED WARRANTY FOR THE conrad-johnson PV7

1.

 

conrad-johnson design, inc. warrants to the original purchaser that the conrad-
johnson PV7 will perform to specifications as published in the owner's manual
and that it will be free of defects in materials and workmanship for a period of
three years from the date of original purchase.

2.

 

conrad-johnson will repair defective units without charge for labor or parts (with
the exception of the vacuum tubes) subject to the following conditions:

a)

 

The unit must not have been altered or damaged through misuse, abuse,
negligence, accident, or improper operation.

b)

 

The purchaser must provide evidence of purchase at the time service is
requested.

c)

 

All repairs must be undertaken at the factory or other service center
designated by conrad--johnson design, inc. Units submitted for warranty
repairs must be shipped in the factory packing carton to conrad-johnson
design or its designated service center, freight and insurance prepaid by the
owner, and will be returned to the owner, freight and insurance prepaid by
conrad-johnson design. Replacement cartons are available from the factory
for a nominal charge.

d)

 

Normal wear and maintenance are not covered by this warranty.

3.

 

The above warranty may be transferred to subsequent owners provided that the
warranty registration card has been returned to conrad-johnson design, inc.
within 30 days of the original purchase and that the registered owner provides the
factory with a signed notice giving the new owner's name and address and the
model and serial number of the unit.

4.

 

Where permitted by law, conrad-johnson design's liability shall be limited to that
set forth in this warranty. No other warranty of any kind, expressed or implied, is
made by conrad-johnson design, inc., and all implied warranties, including
merchantability and fitness for a particular "purpose", which exceed the
obligations and time limits set forth herein are hereby disclaimed. conrad-
johnson design, inc. shall not be liable for-incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the above limitation or exclusion may not apply to you.

5.

 

This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state. Questions about warranty service should be
addressed to:

conrad-johnson design, inc.
2733 Merrilee Drive
Fairfax Virginia 22031
703-698-8581

Содержание PV 7













Отзывы: