SPECIFICATIONS
MV75A: Power
Stereo: 75 watts per channel, minimum RMS at 4, 8, or 16 ohms from 30Hz to
15kHz, with no more than 1% total harmonic distortion or intermodulation
distortion.
Mono: 150 watts minimum RMS at 4 or 8 ohms from 30Hz to 1kHz, with no
more than 1% total harmonic distortion or intermodulation distortion.
Sensitivity: 2.35 volt to full power
Small Signal Distortion: less than .05% at mid-band
Phase: Phase correct (non-inverting)
Frequency Response: 20Hz to 20kHz to -.5db
Hum and Noise: 100 db below full power output
Input Impedance: 100k ohms
Dimensions: 15 x 10½ x 9"
Weight: 43 lbs.
MV45A
Power: 45 watts per channel, minimum RMS at 4, 8, or 16 ohm from 30Hz to 15kHz,
with no more than 1% total harmonic distortion or intermodulation distortion.
Sensitivity: .80 volt to full power
Small Signal Distortion: less than .1% at mid-band
Phase: Phase correct (non-inverting)
Frequency Response: 20Hz to 20kHz to -.5db
Hum and Noise: 90 db below full power output
Input Impedance: 100k ohms
Dimensions: 14¼ x 9½ x 6½”
Weight: 33 lbs.
