I
NSTALLATION
Because the MS1001 amplifier dissipates considerable heat it is essen-
tial that proper attention be paid to ventilation. The unit should be
mounted horizontally on a flat hard surface so that the heat sinks are
unobstructed. At least six inches of clearance should be provided above
the unit, and at least two inches on the sides. The cabinet or shelf should
be open at both front and back. For more restricted installations, cooling
fans are essential.
The front panel of the MS1001 will fit in a standard 19" equipment rack
and is designed to carry the weight of the unit so that it may be rack
mounted. Again, it is important that adequate clearance be provided
above so that ventilation is not impeded. About six inches of the front of
the rack should be left open above the unit.
To minimize hum pickup, keep the unit well away from the preamplifier
and turntable and route power cords away from input cables.
The MS1001 IS TO BE OPERATED ONLY ON AC LINE VOLTAGE OF
108 TO 125 VOLTS.
The MS1001 is available wired for 100 volt, 120V, 220V or 240 volt,
50/60 Hz current.
Motif MS1001 Owner’s Manual
4
